This is a DTF Transfer ONLY

A COMMERCIAL HEAT PRESS IS NEEDED FOR ALL DTF TRANSFERS.

Heat your press to 320-330°.

Pre-press the shirt or material for 5 seconds before adding the transfer to remove moisture.  

Lay the transfer down flat with the ink facing the material. The image should be facing you.

Press with extremely heavy pressure for10-15 seconds. Use Teflon sheet.

Remove from heat press and wait 15 seconds then remove the transfer film off of the shirt.

Place garment back onto heat press & cover design with the Teflon sheet.

Press for 5-7 more seconds to ensure the transfer has properly adhered to your garment.

DTF transfers can be pressed onto any shirt material including cotton and polyester.